Underground Lifting Stations

Sanifos 110

Mood image of a Sanifos 110 1 GR S, lifting station, grey/black water, buried in a garden connections.

Sanifos 110

An automatic lifting station that can be used for pumping residential to industrial waste water when the sewer is at too high a level for natural gravity drainage.
Designed for drainage of a single dwelling incorporating WC, bathroom, kitchen, utility room
Powerful automatic motor with quiet operation
Easy handling for installation below ground level
Pumps up to 11m vertically or 110m horizontally
Find out more

Product details

The Sanifos 110 is an automatic lifting station for residential or industrial waste. It can take waste from a toilet, basin, bath, shower, bidet, washing machine, dishwasher and sink. It is designed to take waste from a single residential dwelling. It has a single macerator pump with float activation method and has robust cutting blades to prevent clogging. The Sanifos 110 has a powerful automatic motor with quiet operation and a 110 litre storage tank. It offers easy handling for installation below ground level. The Sanifos 110 has two inlets that can take up to 110 mm and an additional two inlets that can take up to 50mm, and it discharges through 40 or 50mm pipework An external non return valve and shut off valve are needed for this unit. The Sanifos comes with a 2 year warranty.

Designed, made and tested in our factory in France and with 60 years of expertise and innovation, the Sanifos offers you peace of mind and with the back up from our service team there’s never been a better time to install a SFA.
Technical specification

Sanifos 110

Materials

  • Shaft
  • Tank
  • Pipework
  • Pump housing
  • Seal
  • Foot
  • Motor housing
  • Impeller
  • Shaft
  • Shaft
  • Tank
  • Tank
  • Pipework
  • Pipework
  • Pump housing
  • Pump housing
  • Seal
  • Seal
  • Foot
  • Foot
  • Motor housing
  • Motor housing
  • Impeller
  • Impeller
  • Shaft
  • Stainless steel
  • Tank
  • PE HD
  • Pipework
  • PVC
  • Pump housing
  • PA 6 GF
  • Seal
  • NBR
  • Foot
  • PA 12 GF
  • Motor housing
  • PA 6 GF
  • Impeller
  • PA 6 GF

Electrical features

  • Socket included
  • Voltage (V)
  • Frequency (Hz)
  • Power consumption P1 (W)
  • Power output P2 (W)
  • Revolution per minute (RPM)
  • Maximum current (A)
  • IP Rating
  • Electrical class
  • Motor insulation class
  • Current
  • Number of pumps
  • Length (m)
  • Section (mm²)
  • Type of cable
  • Socket included
  • Socket included
  • Voltage (V)
  • Voltage (V)
  • Frequency (Hz)
  • Frequency (Hz)
  • Power consumption P1 (W)
  • Power consumption P1 (W)
  • Power output P2 (W)
  • Power output P2 (W)
  • Revolution per minute (RPM)
  • Revolution per minute (RPM)
  • Maximum current (A)
  • Maximum current (A)
  • IP Rating
  • IP Rating
  • Electrical class
  • Electrical class
  • Motor insulation class
  • Motor insulation class
  • Current
  • Current
  • Number of pumps
  • Number of pumps
  • Length (m)
  • Length (m)
  • Section (mm²)
  • Section (mm²)
  • Type of cable
  • Type of cable
  • Socket included
  • no
  • Voltage (V)
  • 230
  • Frequency (Hz)
  • 50-60
  • Power consumption P1 (W)
  • 1500
  • Power output P2 (W)
  • 1050
  • Revolution per minute (RPM)
  • 2900
  • Maximum current (A)
  • 6
  • IP Rating
  • IP68
  • Electrical class
  • I
  • Motor insulation class
  • F
  • Current
  • Single-phase
  • Number of pumps
  • 1
  • Length (m)
  • 10
  • Section (mm²)
  • 1.5
  • Type of cable
  • H07 RN-F 3G

Hydraulic

  • Max. Head (m)
  • Max. flow rate (m³/h)
  • Number of inlets
  • External inlet diameter (mm)
  • Discharge diameter ext. (mm)
  • Ext. ventilation diameter (mm)
  • Total volume (L)
  • Useable volume (L)
  • ON Level (mm)
  • OFF level (mm)
  • Max. temperature of the pumped liquid (5 min) (° C)
  • Min. incoming water connection (mm)
  • Type of impeller
  • Type of activation
  • Max. Head (m)
  • Max. Head (m)
  • Max. flow rate (m³/h)
  • Max. flow rate (m³/h)
  • Number of inlets
  • Number of inlets
  • External inlet diameter (mm)
  • External inlet diameter (mm)
  • Discharge diameter ext. (mm)
  • Discharge diameter ext. (mm)
  • Ext. ventilation diameter (mm)
  • Ext. ventilation diameter (mm)
  • Total volume (L)
  • Total volume (L)
  • Useable volume (L)
  • Useable volume (L)
  • ON Level (mm)
  • ON Level (mm)
  • OFF level (mm)
  • OFF level (mm)
  • Max. temperature of the pumped liquid (5 min) (° C)
  • Max. temperature of the pumped liquid (5 min) (° C)
  • Min. incoming water connection (mm)
  • Min. incoming water connection (mm)
  • Type of impeller
  • Type of impeller
  • Type of activation
  • Type of activation
  • Max. Head (m)
  • 14
  • Max. flow rate (m³/h)
  • 15
  • Number of inlets
  • 4
  • External inlet diameter (mm)
  • 125, 110, 40, 100, 50
  • Discharge diameter ext. (mm)
  • 50
  • Ext. ventilation diameter (mm)
  • 75
  • Total volume (L)
  • 110
  • Useable volume (L)
  • 38
  • ON Level (mm)
  • 320
  • OFF level (mm)
  • 120
  • Max. temperature of the pumped liquid (5 min) (° C)
  • 70°C
  • Min. incoming water connection (mm)
  • 182
  • Type of impeller
  • Pro X K2 grinder
  • Type of activation
  • float

Logistics

  • Gross weight (kg)
  • Gross weight (kg)
  • Gross weight (kg)
  • Gross weight (kg)
  • 31

General description

  • EAN code
  • EAN code
  • EAN code
  • EAN code
  • 3308815079318
Products

Related products

0

Quality

Buy with confidence

  • Made in France

    Many products have received the Made in France label.

  • Performance and Reliability

    Technologies and materials that ensure efficiency and longevity.

  • Warranty

    Up to 2 years warranty.

  • Extensive support

    A network of repair technicians.

  • Experts Since 1958

    Creator of the Sanibroyeur macerating toilet.