Language:
-
To install a new bathroom, an additional toilet, a laundry room or to get rid of condensates from boilers / aircons, SFA has the solution you need. Without major work, you can simply drain and pump all the water away.
-
For a boiler, an air conditioner, a shower, a toilet, a kitchen, a laundry room, a refrigerated display, a house or even a whole building, SFA has been the expert in lifting all types of water (grey / waste /sewage) since 1958 whether you are an end user or a professional, we cover all water drainage requirements from a single split to a complete building.
-
-
The historic inventor of SANIBROYEUR® forged its expertise through time. Discover the history and values of SFA Group.
-
SFA offers you single-phase or three-phase power solutions, for grey water, black water even rainwater.
Sanifloor + 3, for extra-flat shower trays.
Designed specifically where floor drainage is required but where space underneath is very limited e.g. wet rooms or bathrooms with a low entry shower tray. This two part kit with a powerful shower waste pump and a choice of four waste designs can pump up to 3m vertically or 30m horizontally. Higher flow rate means it can be used with powerful ‘rain head’ showers.
- Suits wet rooms and low level shower trays, ideal for high flow applications
- Pump and waste inlet can be up to 3m apart horizontally
- Pump can be sited up to 300mm above the gully
- Dual function - sucks waste up from the gully and pumps waste water away up to 3m vertically or 30m horizontally
The Sanifloor + 3 is an ideal pumping solution for use with a shower tray within a wetroom or bathroom environment. It is capable of pumping a standard electric or gravity mixer shower. This two part kit contains a shower pump and 4 differing wastes depending on application needed. The Sanifloor + is now wireless making it even easier to...
See more
Sanifloor + 3 datasheet
Dimensions l x w x h (mm)
295 x 191 x 164
*Packing list: Sanifloor + pump, dedicated drain, check valve, connectors.
Ref: EAN 3308815076164
| Sanifloor + 3 | |
|---|---|
| Max. flow rate | 30 L/min at 1m |
| Number of inlets available | 1 |
| Diameter of inlets | 16 mm |
| Recommended discharge diameter | 32 mm |
| Engine consumption | 400W |
| Supply voltage | 220-240V/50Hz |
| Maximum absorbed current | 1.7 A |
| Electrical class | I |
| Protection index | IP44 |
| Maximum temperature of incoming water | 35 °C |
| Max. horizontal discharge | 30 m |
| Max. vertical discharge | 3 m |
| Shower tray height | 0 cm |
| Total height | 57 mm |
| Materials used for the drain | ABS / stainless steel |
| Outlet diameter of the drain | 16 mm |
